Which Single-Wire Monitor is Best for your Application?

Continuous Monitors provide operators with instant feedback on the status and functionality of their wrist strap and/or workstation. They detect split-second failures when the wrist strap is still in the “intermittent” stage. This is prior to a permanent “open” which could result in damage to ESD sensitive components. Continuous Monitors verify the ground integrity of both the operator and ESD workstation and eliminate the need for periodic testing (and record keeping).

Single-Wire Monitoring allows the use of any standard, single-wire wrist strap and coil cord. The monitor / wrist strap system life-cycle costs are significantly lower than dual-wire systems. While they would not be suitable for the most critical applications, Single-Wire Continuous Monitors are an economical way to monitor both the operator’s wrist strap and workstation surface.

222608
The Multi-Mount Monitor continuously monitors:
• One operator wearing a wrist strap
• One ESD worksurface

Its small package and mounting tabs with holes make it highly suitable to install on most equipment or work bench surface.222603

 

The Jewel® Mini Monitor continuously monitors:
• One operator wearing a wrist strap
• One ESD worksurface

This unit is ideal for individual workstations for assembly, test, packaging or other applications.

222744

 

The Dual-Operator Monitor continuously monitors:
• Two operators wearing a wrist strap
• Two ESD worksurfaces

This unit is ideal for workstations that are shared by two operators.

 

To determine the correct monitor for your application, make sure you check our Continuous Monitor Selection Chart.

About Vermason

Vermason is a manufacturer of ESD protection products and was founded in Letchworth in 1979. Our mission is to maintain our position as the primary ESD solutions provider for the electronics industry in Europe. Vermason strive to manufacture quality ESD Control products with innovation, leadership and partnerships which deliver long term commercial benefits. We understand the many challenges our customers face regarding quality and reliability. We support these requirements with products and services of exceptional value which help them gain competitive advantages in their markets. We also appreciate that the control of ESD is one of many necessary links in a long chain required to bring a customer’s project to a successful completion. We endeavour to make that happen. We sustain our vision and mission by constantly seeking renewal via continuous education, application of new technologies and good business practices. Employees are expected to serve the customer with the highest level of technical knowledge in the industry.

Posted on 2015-12-10, in Articles, Continuous Monitors, Resources, Single-Wire Continuous Monitors, Working Surface Mats, Working Surface Mats and Accessories, Wrist Straps and Coiled Cords. Bookmark the permalink. Leave a comment.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: