Storage and Transport of ESD Sensitive Items

Follow us on Twitter  View our profile on LinkedIn  YouTube  GooglePlus

We thought today we could focus on ESD during storage and transport. If you have read our recent post on Tips to Fight ESD, you will remember how important it is to protect your ESD sensitive items when leaving an EPA. Yet, too often we see customers who have the perfect EPA, but when it comes to transporting and storing their precious components, it’s all falling apart.

1. Packaging required for transporting and storing ESD sensitive items

During storage and transportation outside of an EPA, we recommend that ESD sensitive components and assemblies are enclosed in packaging that possesses the ESD control property of shielding.

Remember:

  • In ‘shielding’ we utilise the fact that electrostatic charges and discharges take the path of least resistance.
  • The charge will be either positive or negative; otherwise the charge will balance out and there will be no charge.
  • Charges repel so electrostatic charges will reside on the outer surface.


2. The Faraday Cage effect

A Faraday Cage effect can protect ESD sensitive items in a shielding bag or other container with a shielding layer. To complete the enclosure, make sure to place lids on boxes or containers and close shielding bags.

ESDPackaging
Cover must be in place to create Faraday Cage and shield contents.

3. Types of shielding packaging

The below list gives a few examples of what types of shielding packaging is available on the market. This list is by no means complete; there are many different options out there – just make sure the specifications state “shielding” properties.

  • Metal-In Shielding Bags
    ESD bags which protect ESD sensitive items. The ESD shielding limits energy penetration from electrostatic charges and discharge. They offer good see-through clarity. Available with and without dissipative zipper.
  • Metal-Out Shielding Bags
    Integral antistatic and low tribocharging bags which will not electrostatically charge contents during movement. Bags have an aluminium metal outer layer of laminated film. Available with and without dissipative zipper.
  • Moisture Barrier Bags
    Offer ESD and moisture protection and can be used to pack SMD reels or trays. Check out this post for more information on MBB and ESD Control.
  • Bubble Shielding Bags
    These bags combine the “Faraday Cage” and mechanical protection. They shield about twice as well as normal shielding bags of equivalent size.
  • Component/Circuit Boards Shippers
    These boxes offer an efficient way of shipping or storing ESD sensitive circuit boards and other items. They provide ESD shielding with the lid closed. The foam cushioning reduces stress from physical shock.
  • In-Plant Handlers/Storage Containers
    Shield ESD sensitive items from charge and electrostatic discharges (with lid in place). They provide ESD and physical protection for ESD sensitive circuit boards.


4. Additional options for storing ESD sensitive items

Do you have the following in place?

  • ESD flooring
  • Grounded personnel (using foot grounders). Read this post for more information on how to ground moving personnel.
  • Grounded racking

TEAMOperator wearing foot grounders

IF (and this is a BIIIG IF) the above requirements are fulfilled, you can use conductive bags or containers to store your ESD sensitive items. Conductive materials have a low electrical resistance so electrons flow easily across the surface. Charges will go to ground if bags or containers are handled by a grounded operator or are stored on a grounded surface.
Conductive materials come in many different shapes and forms:

  • Conductive Black Bags
    Tough and puncture resistant bags which are made of linear polyethylene with carbon added. The bags are heat sealable.
  • Rigid Conductive Boxes
    Provide good ESD and mechanical protection. Boxes are supplied with or without high density foam for insertion of component leads or low density foam which acts as a cushioning material.
  • PCB Containers
    Are flat based and can be stacked. They are made of injection moulded conductive polypropylene.

Again, there are many more options available on the market so make sure you do your research.

Note: we do not recommend using conductive packaging to transport ESD sensitive devices. Also, pink antistatic and pink antistatic bubble bags are not suited for storing or transporting ESD sensitive components.

5. Final thoughts

Packaging with holes, tears or gaps should not be used as the contents may be able to extend outside the enclosure and lose their shielding as well as mechanical protection.
Also, do not staple ESD bags shut. The metal staple provides a conductive path from the outside of the ESD bag to the inside. The use of a metal staple would undermine the effectiveness of the ESD bag making a conductive path for charges outside the bag to charge or discharge to ESD sensitive components inside the bag. To close an ESD bag, it is recommended to heat seal or use ESD tape or labels after the opening of the bag has been folded over. Alternatively, you can use ESD bags with a zipper.

Picture5Sealing ESD Bags the correct way

One final word of warning:
When ESD sensitive items are unpackaged from shielding bags or other containers, they should be handled by a grounded operator at an ESD workstation

 

 

About Vermason

Vermason is a manufacturer of ESD protection products and was founded in Letchworth in 1979. Our mission is to maintain our position as the primary ESD solutions provider for the electronics industry in Europe. Vermason strive to manufacture quality ESD Control products with innovation, leadership and partnerships which deliver long term commercial benefits. We understand the many challenges our customers face regarding quality and reliability. We support these requirements with products and services of exceptional value which help them gain competitive advantages in their markets. We also appreciate that the control of ESD is one of many necessary links in a long chain required to bring a customer’s project to a successful completion. We endeavour to make that happen. We sustain our vision and mission by constantly seeking renewal via continuous education, application of new technologies and good business practices. Employees are expected to serve the customer with the highest level of technical knowledge in the industry.

Posted on 2016-02-25, in Articles, Bags and Labels, ESD Information, Foot Grounders, How-To, Packaging, Handling and Storage, Protektive Pak® ESD Containers, Resources, Tape, Working Surface Mats, Working Surface Mats and Accessories and tagged , , , , , , , , , , , , , , , , , , . Bookmark the permalink. 5 Comments.

  1. Thank you for such a great write up. Shifting to a distant place is a traumatic process and shipping the sensitive stuff is never an easy task.

  1. Pingback: What is a Faraday Cage? | Vermason Blog

  2. Pingback: How to set-up an ESD Control Plan | Vermason Blog

  3. Pingback: 6 Steps to defining ESD Protective Packaging Requirements for ESD Sensitive Items | Vermason Blog

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: